Golight GXL LED Spotlight Fixed Mount in Black

Golight GXL LED Spotlight Fixed Mount in Black 4411 GXL LED

Your Price: $229.00

Golight introduces the GXL, fixed LED work light. Available in spot or flood configurations, the GXL is the incredibly intense, compact and durable lighting solution for your work truck or utility vehicle.

Part Number: 4411 GXL LED

Quantity

Description
Special Offer
Additional Information
WARNING CALIFORNIA

Golight GXL LED Spotlight Fixed Mount in Black 4411 GXL LED Xtreme Lighting

Features:

Multiple Illumination Options - Spot, Flood, IR
Floodlight Output 6000 Max Lumens
Spotlight Intensity 110,000 Candela
94% Optical Efficiency
50,000 hr Life Expectancy
9-32 Volt DC Input
IP 68 Rating
Shock Proof Solid State Lighting
Instant On
Quick Adjust Mounting Cradle
Operating Temp Range: -40° - 145° F
Low Power Draw
Powder Coat Cast Aluminum Heat Sync
10 Year Limited Warranty

GXL™ Models

4411 - GXL LED Spotlight (black)

4421 - GXL LED Floodlight (black)

4422 - GXL LED Floodlight (white)

The GXL® is an LED, fixed-mount work light offering incredible intensity and durability in a small package. Utilizing the latest in LED, lens and reflective technology, the GXL® casts light where you need it. Contents: Bracket to mounting surface hardware: 1. Qty. 1: GXL® light head with 3ft., 2 wire power lead 2. Qty. 1: Mounting bracket 3. Qty. 2: 3/8” x 1 ¼” carriage bolts 4. Qty. 2: Large flat washers 5. Qty. 2: 3/8 in. lock nuts Bracket attachment hardware: 6. Qty. 2: Spacers 7. Qty. 4: 1/4” x 1 1/8” socket head cap screws (allen screws) 8. Qty. 4: Locknuts 9. Qty. 4: Small flat washers 10. Qty. 2: Thumb Screws (optional) Mounting / Installation: 1. Determine a suitable mounting location for the light. 2. Once a location has been decided upon, use the mounting bracket as a template to mark appropriate bolt-hole locations— note that the vertical adjustment channel on the bracket indicates the posterior side of the bracket/light(refer to diagram). 3. The GXL® can be mounted using one or both of the provided carriage bolts. If future adjustment along the horizontal access is desired, the light should be affixed using one bolt inserted through the center mounting hole. If the light is to remain static along the horizontal axis, both bolts should be used to affix the light and should utilize the holes nearest the vertical arm on the either side of the mounting bracket.

4. Drill mounting holes using a 7/16” drill bit. **Before attaching the mounting bracket to the surface, attach the mounting bracket to the GXL® : 5. When attaching the mounting bracket to the GXL® , the included oval spacers must be installed between the bracket and GXL® to ensure a proper fit. 6. After inserting the spacers into their receptacle on the right and left lateral of the GXL® (refer to diagram) the arms of the mounting bracket can be positioned over the spacers with the pivot hole and vertical channel aligned with the corresponding attachment holes.

7. The mounting bracket should be affixed using the allen screws and lock nuts provided. Slide the inward facing lock nuts into the channels molded into the heat sink on the back of the light. The channels are molded in such a manner that no tool is required to hold the nut in place while tightening. The included thumb screws may be utilized in place of the socket head cap screws in the vertical channel to facilitate easier vertical adjustment. Installation of the thumb screw should follow the same procedure as the socket head cap screw. Take care not to over tighten the associated hardware in the pivot hole. 8. Insert the allen screws through the holes and thread them into their corresponding nut. 9. After attaching the mounting bracket to the GXL® align the bracket with the pre-drilled hole/holes and affix the unit with the supplied carriage bolt/bolts. 10. Adjust GXL® to desired position and tighten all hardware. Wiring Procedure and Power Requirements: 1. Extend the red (+) wire to a customer supplied on/off switch 2. Extend another wire from the on/off switch to the positive (+) terminal of the vehicle battery. Installation of an in-line 7-10 amp fuse is recommended. 3. Extend the black (-) wire to the negative (-) terminal of the vehicle battery or to a solid chasis ground. 4. Please take note that appropriately sized (awg) must be installed according to the length of wire and the necessary capacity. The GXL will draw 5.5 amps (nominal) at 12V DC and 2.5 amps (nominal) at 24V DC. The GXL® will accept voltage between 9V-36V DC

Golight GXL LED Floodlight Fixed Mount in Black 4421 GXL LED Xtreme LIghting

(0)

$239.00

Add To Cart

Golight GXL LED Floodlight Fixed Mount in White - Marine Grade 4422 GXL LED Xtreme Lighting

(0)

$239.00

Add To Cart

Golight GXL LED WORK LIGHT SERIES FIXED MOUNT FLOOD LIGHT - BLACK 4021

(0)

$319.00

Add To Cart

Golight GXL LED WORK LIGHT SERIES FIXED MOUNT FLOOD LIGHT - BLACK 4023

(0)

$319.00

Add To Cart

Golight GXL LED OFF-Road Series Fixed Mount Spotlight - Black 4211

(0)

$229.00

Add To Cart

[history_item_name]

[ITEMPRICE] ~~[ITEMPRICE] Original price~~ [ITEMSALEPRICE] Sale

Clear

Golight GXL LED Spotlight Fixed Mount in Black 4411 GXL LED

Related Items

Recently Viewed Items