SlideMoor docking system solves most of the docking problems that
most boaters will encounter. This simple system (almost too simple)
ties your boat TIGHT to a bumper/Slide that rides on an 8' track you
bolt to your piling.
The vertical movement caused by waves and
tides make the self lubricating carriage move up and down with your
boat as necessary but any horizontal motion or surge is not allowed
since the boat is tied tight to the Slide. Since all horizontal
motion is eliminated, no "wind-up" is allowed to start and therefore
no damaging "punch" will harm your boat or dock.
This simplifies docking lines by eliminating
ALL lines except the short lines on the SlideMoor docking system
which are all on one side of your boat. Simple. This eliminates
bumpers, whips, outer tide poles. No movement when loading or
unloading. Larger boats can fit in smaller slips since this motion
is all but eliminated.
