 Moor
your craft the safe, secure, fast and convenient way;
Protect your craft and dock from the natural
forces of: wind, waves, wakes and tidal action. Safe
Harbor Marine's Mooring Arms securely suspend your craft
a safe distance from the dock.
- Protect your craft & dock - suspends your craft
away from the dock
- Gentle on your craft & dock - no line shock
- Quick and easy to moor up & cast off - only two
lines
- Easy to Install
|
|
Why change from conventional mooring?
Coventional mooring is more complex, requiring four lines
(bow, stern and two spring lines) and bumpers to snug your craft against
the dock.
Natural forces cause chafing between the dock, bumpers and craft.
Bumpers can also work their way out from between your craft and dock,
resulting in severe damage.
Why are Safe Harbor Marine's Mooring Arms
superior to mooring whips?
Whip-type mooring systems are even more complex, requiring up to
six lines to moor you craft.
Mooring whips allow slack in the mooring lines... slack that cause
line shock to your craft and dock during rough conditions
How mooring arms work;
When your craft is moored, the universal joint dock attachment allows
each arm to freely move up and down so the craft can gently ride all
water action, calm to severe.
The combination of secured SnapLines, rigid UV impervious fiberglass
arms and stainless steel dock attachments, prevents your craft from
moving in or out, fore or aft.
Casting Off - Fast with convenient stowage!
-
Fast: Only one line to un-cleat
-
Convenient Stowage: Arms pivot onto dock when not in use
- Un-cleat the bow SnapLine, lift the arm up and pivot
forward allowing the line to feed through the arm tip. This
pulls your craft over to the dock.
- Un-snap the bow line and lay the arm onto the dock.
Next, pull your craft back and the stern closer to the dock.
- Un-snap the stern SnapLine (no need to un-cleat this
line), pivot the stern arm back
and lay the line and arm on the dock for your return. You're
now free to cruise!
|
Mooring Up - Quick and secure;
-
Quick: only two lines required
-
Secure: with our SnapLines mooring is easy and secure every time
1. Snap on the stern SnapLine and pivot the stern arm out to the end
of the line.
2. Snap on the bow SnapLine and pull the line taut. This will extend
the bow arm automatically to the end of the line and pull your craft
safely away from the dock. Cleat the bow SnapLine taut.
A
variety of applications for various boats and personal
water craft;
Standard Installation
Simple, safe and secure - using only two SnapLines.
No ropes or bumpers to untie and stow. System pivots on
to dock when not in use.
|
 Single
Arm Installation
Mooring Arms can also be used in slips to suspend one
end of the craft away from the pier when the other end
is attached to the main dock.
|
 Personal
Water Craft Installation
Fast, secure mooring for your PWC - in the water and
ready to go. You can now warm up and tune up your PWC at
the dock.
|
 Sailboat
Installation
Finally, a convenient mooring system for sailboats.
No chaffing against the dock. No tall whips to
tangle in rigging
|
|
|
