SeaEagle Motormounts
(Parts are not sold separately.
Only sold with the purchase of a boat)
Extension Handle.
Just $59.00
HelmsMate
Extension Handle allows you to steer an electric or outboard motor when it
is directly behind you. Complete steering and throttle control with inproved
weight distribution in your boat. Metal Universal Joint allows for easy
steering. Fits all motors. Length is adjustable from 37" to 52" for optimal
seating position. Recommended for use with our Paddleski Center Motormount.
MM-2 Motormount for SE-6. Just $55.00
The MM-2 provides the
SE-6 with ample strength to hold a 2 hp. gasoline engine or any electric
motor. Fits models produced after 1985.
MM-3 Motormount for SE-8 and SE-9. Just $65.00
The
new, improved MM-3 Motormount works better because the aluminum tubing now
bends back into the hull. The MM-3 is solid yet light and easy to assemble.
It can carry a 4 hp engine on the SE-9, and a 3 hp. engine on the SE-8. Fits
models produced after 1985.
PaddleSki Center Motormount. Just $59.00
Center
Motormount for PaddleSki allows you to use up to a 3hp gas engine on our
PaddleSki 395ps and 435ps. Center Motormount bolts and straps to the rear of
the boat where the rear crossbar is attached. For proper control of gas
engine we recommend using the Extension Handle accessory.
PaddleSki Motormount.
Just $59.0
Bolts
and straps to rear of our PaddleSkis. Holds up to 85 lbs. thrust electric
engine - sorry, not for gas engines! Made with coated marine plywood with
aluminum & stainless steel components. A nice feature of this design is that
the weight of the battery on the starboard side balances the motor on the
port side. Battery box not included. Shown with deluxe fly fishing high seat
also not included. Motor Not Included
MinnKota Classic 28 Motor w/MMPS. Just $149.00
MinnKota
Classic 28 Electric Motor with Side Motormount for Paddleskis.
Bow Motormount. Just
$29.00
If
you would like to turn your 8.6 FT, 9.2SR, 9.6 SR or 10.6 SR into a killer
bass fishing machine here is the answer. Our bow motormount will hold up to
a 85 lbs. thrust electric motor so you can get into those tight spots filled
with fish.
HelmsMate
Extension Handle allows you to steer an electric or outboard motor when it
is directly behind you. Complete steering and throttle control with inproved
weight distribution in your boat. Metal Universal Joint allows for easy
steering. Fits all motors. Length is adjustable from 37" to 52" for optimal
seating position. Recommended for use with our Paddleski Center Motormount. 
The MM-2 provides the
SE-6 with ample strength to hold a 2 hp. gasoline engine or any electric
motor. Fits models produced after 1985.
The
new, improved MM-3 Motormount works better because the aluminum tubing now
bends back into the hull. The MM-3 is solid yet light and easy to assemble.
It can carry a 4 hp engine on the SE-9, and a 3 hp. engine on the SE-8. Fits
models produced after 1985. 
Center
Motormount for PaddleSki allows you to use up to a 3hp gas engine on our
PaddleSki 395ps and 435ps. Center Motormount bolts and straps to the rear of
the boat where the rear crossbar is attached. For proper control of gas
engine we recommend using the Extension Handle accessory. 
Bolts
and straps to rear of our PaddleSkis. Holds up to 85 lbs. thrust electric
engine - sorry, not for gas engines! Made with coated marine plywood with
aluminum & stainless steel components. A nice feature of this design is that
the weight of the battery on the starboard side balances the motor on the
port side. Battery box not included. Shown with deluxe fly fishing high seat
also not included. Motor Not Included
MinnKota
Classic 28 Electric Motor with Side Motormount for Paddleskis.
If
you would like to turn your 8.6 FT, 9.2SR, 9.6 SR or 10.6 SR into a killer
bass fishing machine here is the answer. Our bow motormount will hold up to
a 85 lbs. thrust electric motor so you can get into those tight spots filled
with fish.