Lectrotab developed this non-hydraulic, electromechanical product in order to avoid the disadvantages inherent with the hydraulic approach.

The Lectrotab design advantages include:

• A tab actuator design which contains all of the actuating assembly within its own housing so there is nothing to install inside the boat.

• A non-hydraulic design which can't leak oil because there is none.

• Convenient helm mounted control switches which provide instant actuator start and stop for very accurate positioning.

• A full pivoting upper bracket for maximum installation flexibility.

• A patented ram seal which cannot be fouled by barnacle growth and a patented internal pressurization system for added watertight integrity.

• A complete non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water.

The Lectrotab installation is quick and saves space.  Also with an actuating force exceeding 700 pounds, your tabs are promptly positioned where you want them and stay put. 

Lectrotab Features

• FIVE YEAR WARRANTEE from Manufacturer

• Actuator has a completely non-metallic exterior for absolute resistance to corrosion. 

• Hardened steel, free wheeling ballscrew provides 700 pounds of force WHEN PUSHING AND 100 pounds when PULLING the tab in both directions and eliminates electrical limit switches. . 

• The 8 second stroke time and 12 volt is standard. For special applications 4 second stroke time is available. Also  24 VDC. Stroke length is 2 1/4 inches. 

• Lower scraper cleans the Ram when retracted but the water seal is located beyond where the fouled portion of the Ram can reach (US PAT.#5881666).

• For retrofit, the Ram fits directly into the most popular tab bracket. 

• Screw hole pattern and wire exit position match the screw pattern and hydraulic connection of the most popular hydraulic type. Actuator wire may be routed neatly through the upper bracket or around the bracket. 

• Upper bracket can be positioned from vertical to horizontal. 

• Reversible D.C. motor is torque limited to protect the gearbox and current limited to protect the motor.

• Greased and sealed, 40:1 planetary gearbox vides smooth, quiet, high torque drive to the ballscrew. 
• Vent tube check valve allows air in, but not out, thus providing automatic internal pressurization each time the tab is retracted (US PAT. #5881666). 
• Controlled torque thrust bearing provides positive breaking against reverse free wheeling.
• 12-gage, 304 stainless steel, two-piece, integral hinge tabs have no welds, are straightforward to install and have no gaps in the hinge rotation are to become fouled.  Custom edge bends are available. Polished or powder coat optional.
• Tab bracket is secured with a flush head fastener pressed into the tab providing a smooth lower tab surface.
• Ram to bracket attachment is a shear pin.
   

  Part Number
  BOAT KITS with SAF-S Basic Panel Switch
  Includes 2 actuators w/brackets, 2 standard trim tabs, 1 switch assembly, 20' interconnect wire and 1 hardware kit (First number is depth (out from hull) - second number is width along hull)
  SAF-S - Basic Panel
  		.
  		KAF9X9   $419.00
  		KAF9X12  $429.00
  		KAF9X18  $449.00
  		KAF9X24  $479.00
  		KAF9X30  $499.00
  		KAF9X36 $509.00
  		KAF12X9  $429.00
  		KAF12X12 $439.00
  		KAF12X18 $479.00
  		KAF12X24 $489.00
  BOAT KITS with SETR  "The Oval"  Switch
  Includes 2 actuators w/brackets, 2 standard trim tabs, 1 switch assembly, 20' interconnect wire and 1 hardware kit
  SETR "THE OVAL" Switch available in Black or Grey                                              One piece to  install Tab indicators Tab up at switch off Auto-Dim at night Salt, soap, and waterproof
  		KAS9X9	$539.00 Black Grey
  		KAS9X12	$549.00 Black Grey
  		KAS9X18	$569.00 Black Grey
  		KAS9X24	$599.00 Black Grey
  		KAS9X30	$619.00 Black Grey
  		KAS9X36	$629.00 Black Grey
  		KAS12X9	$549.00 Black Grey
  		KAS12X12	$559.00 Black Grey
  		KAS12X18	$599.00 Black Grey
  		KAS12X24	$609.00 Black Grey