|
 |
PTT60SS Part # 6100
PowrTran PT&T units unlock the hidden performance potential
in boats and motors. Our power trim and tilt features
advanced engineering with a combination of features. The
PowrTran Tilt & Trim is like a transom bracket and power trim and tilt
all combined into one superior unit. It not only enhances
top end speed, but also reduces fuel consumption, improves
hole shots, stabilizes boat ride and tracking, and
eliminates most plowing, porpoising and chinewalking.
The PowrTran Power Tilt & Trim has full power all the way up, and will
not kick down from propeller force at any degree of trim.
The PowrTran PT&T is ideal for most boats, including
pontoons. Best of all, PowrTran Power Tilt & Trim units are very
economical. They cost less than most factory units and are
easier, faster and less expensive to repair than factory
hydraulic units. Simply put, the PowrTran Tilt & Trim has no equal.
Should service be necessary the actuator is removed in
minutes by removing two clevis pins and unplugging the
electrical cord. Just place the clevis pin in the hole in
the lower port side of the PT&T frame and continue boating..
The PTT60SS is designed for bolt on motors.
Specifications:
Max Horsepower: 130
Weight: 40 lbs.
Dimensions: 17½” W x 14 ½ “ H x 6 ¾” D
Degree of Tilt: 63º
Operation: 12 Volt Electro-Mechanical
Actuator Drive: Ball Screw
Construction: 6061-T6 Marine Alloy Extruded Aluminum Frame
Hardware: Stainless Steel |
