Home Help


Home HelpPrivacy | Export | Tracking| Pricing| Contact

 

Open Daily
8AM - 11PM Eastern Time


 
Accessories
Banana Boats
Barbeques
Battery Chargers
Barometers
Binoculars
Bilge Heaters
Body Saver Mats
Chargers
Canoes
Clocks
Docking Systems
Dock lights
Fenders
Fireplaces
Fishing Boats
Hatch Lifters
Heaters
Hunting
Ice Fishing Shelter
Inflatable Boats
Jack Plates
Kayaks
Keel Guard
Ladders
Mats
Mooring Whips
Pedal /Paddle Boats
Pontoon Boats
Power Steering
Propellers
SailCat
Spotlights
Steering Wheels
Steering Systems
Stoves

Tilt & Trim
Trailers
Trampolines
Transom Jacks
Trim Tabs
Trolling Motors

Wakeboard Racks

Wakeboard Tower

Water Skeeter

Wall Heaters

Wetsuits

Winches

BoatSafe Marine Bilge Heaters
For Cabin & Engine Compartments
Reliable, safe, efficient and powerful. Bensaco BoatSafe Boat Heaters,
 a bilge heater specifically designed for boats.
Also Boatsafe Marine Cabin Heaters. Recessed In-The-Wall Units Click Here

Features and Benefits
Engine Compartment Heaters

"Eliminate the bother and expense of winterizing your engine(s)."

Engineered to rigid and demanding specifications to provide years of
dependable and trouble free service.


Extend Your Boating Season with BoatSafe Heaters- Use your boat when you want to, not when weather dictates.

Complete Safety - No sparks which could ignite combustible vapors.
(Conventional space heaters, and light bulbs, are totally unsafe for an engine compartment because of the danger of sparks igniting vapors.)

The Bensaco BoatSafe BSAT - 750 Watts of Forced Air Heat - Utilizes a dependable, computer style fan for heat distribution. (For engine compartments up to 650 cu.ft.) This size heater unit is required for any boat that is stored out of the water on a lift, or on a trailer.

The Bensaco BoatSafe Jr. - 250 Watts of Forced Air Heat - Designed for smaller engine compartment applications. (For engine compartments up to 150 cu.ft.) This heater unit will not provide adequate protection for a boat that is stored out of the water on a lift, or on a trailer.

BSAT & Jr. - Automatic Thermostat - Factory calibrated and pre-set to activate at 45°F (approx). Thermostat is an integral component of heater unit.

Both BoatSafe Heater Models operate on 120 Volt Shore Power*, or Gen-Set Power.

*Any electrical device does require a consistent and dependable source of power to operate efficiently.

Boatsafe heaters are Easy to Install - Can be mounted in any position, or at any angle in the engine compartment, except upside down under the deck.

Dimensions -
750 Watt Model 6.5" H x 6.5" W x 21" L - 2" Mounting Brackets.
250 Watt Model 5.5" H x 4.5" W x 14.5" L - 1" Mounting Brackets.

There is a 20 ft power cord on the 750 Watt and 15ft power cord on the 250 Watt unit.

The 250 Watt unit has a 3 prong plug.

Economical to Use -
750 Watt Model - Cost 6˘/Hr. of operation.
250 Watt Model - Cost 2˘/Hr. of operation.
(Based on average electricity cost of 8˘/KWH)

Helps Keep Engine(s) and Wiring Dry and Corrosion Free.

Helps Extend Battery Life - Allows batteries to deliver full starting power in cold weather.

Enhances the Resale Value of Your Boat - An installed BoatSafeŽ
increases your boat's value.

Saves Money by Eliminating the Annual Costs of Winterizing & Dewinterizing your engine(s) in some climates.

The BoatSafeŽ Marine Engine Compartment Heaters are designed and manufactured to meet U.S. Coast Guard Ignition Protection Standards.

Constructed with UL and CSA Certified and Recognized, and FM Approved Components.

Boat Safe Heaters have a Full One Year Warranty, plus a "Lifetime Service Guarantee".


BoatSafe Bildge Boat Heater   250 Watts


Shown with optional mounting bracket

For  More Details Click Here
For Feature List Click Here
Other Considerations

FOR BOATS UP TO 24' and has a built in circuit breaker for boats without shore power

250 Watts Model BoatSafeJR


Our price $299.00

 The BoatSafe Jr. - 250 Watts of Forced Air Heat - Designed for smaller engine compartment applications. (For engine compartments up to 150 cu. ft.) This heater unit will not provide adequate protection for a boat that is stored out of the water on a lift, or on a trailer.

BoatSafe  Bilge Boat Heater   750 Watts


Shown with optional mounting bracket

For  More Details Click Here
For Feature List Click Here
Other Considerations

FOR BOATS UP TO 25-42' (Multiple Units May be Required)

750Watts

Model BSAT
The BoatSafe BSAT - 750 Watts of Forced Air Heat - Utilizes a dependable, computer style fan for heat distribution. (For engine compartments up to 650 cu.ft.) This size heater unit is required for any boat that is stored out of the water on a lift, or on a trailer.


Our price $399.00